Load Menu From Usb Or Smart Card - TurboChef sota Service Manual

Oven Model:
The oven model shown on the screen must match
the model of the oven being serviced. If this set-
ting must be changed, select the proper oven model
from the list shown on the display.
CAUTION: An improperly set oven model
will result in the oven not cooking properly.
Serial Number:
Edit the serial number using the on-screen keyboard.

Load Menu from USB or Smart Card

NOTE: To update a menu, you may need to verify
that access to the Load Menu screen is turned on.
See page 25 for details.
USB setup: When loading from USB, the menu can
be in XTM (ChefComm) or BIN (binary) format.
The files must be loaded on the root of the USB.
The oven will also detect menus if they are stored in
a folder named TC_Menus.
To load a menu to the oven,
1. When the oven is off or cooling down, insert
the USB or smart card (see above). The oven
will automatically detect the device. Touch
"OK" to proceed.
2. Load the menu:
a. Touch "Load Menu to Oven."
b. Touch "OK" to confirm the selection and
begin the installation.
NOTE: When loading a menu from a USB,
a copy of the current menu will be saved
to the USB.
c. Touch the menu to load.
NOTE: If multiple menus are on the USB,
the oven will display the menu names.
Otherwise this step will be bypassed.
3. Once installation is complete, the oven
will display "Installation Complete."
31