Changing Group/Item/Quantity Name; Changing Cook Settings - TurboChef sota Service Manual

18 INFO, TEST, AND EDIT MODE (NON-TOUCH)
Editing Recipe Settings

Changing Group/Item/Quantity Name

To change a food group, item, or quantity name:
1. Place the oven in Edit Mode (see page 17).
2. Press the R2 soft key to edit temperature 1 groups
or the R4 soft key to edit temperature 2 groups
(Figure 26, page 17).
3. Select the group that contains the item(s) you
want to edit.
4. Select a food item.
5. Select a quantity (high-capacity menus only).
6. From the "Recipe Edit" screen (Figure 27), edit
the food group name:
- Use the number keys to change a character.
- Press the R1 soft key to advance to the next
character.
- Press the L1 soft key to return to the previous
character.
- Press the R2 soft key to save changes.
7. Edit the recipe name:
- Press the Down key to move to the "Recipe
Name" field.
- Use the instructions provided in step 6 to
edit the recipe name.
8. If applicable, edit the quantity name:
- Press the Down key to move to the
"Quantity Name" field.
- Use the instructions provided in step 6 to
edit the quantity name.
9. Press the R2 soft key to save changes. For
additional editing options, see adjacent.
L1
LUNCH
EVENT %TIM %TOP %BOT %WAV
L2
1
2
3
4
L3
5
6
WARM TIME = 00:35
L4
Figure 27: Recipe Edit Screen
R1
A
QTY 1
R2
050 070 060 050 SAVE
050% 060 060 050
000 010 010 000
000 010 010 000
R3
TIME
000 010 010 000
000 010 010 000
% TOTAL = 100
R4
WARM
SP = 500F CC = 455F

Changing Cook Settings

To change cook settings,
1. Follow the steps in Changing Group/Item/
Quantity Name, adjacent.
2. Use the number keys to adjust event settings:
- % Time (0-100% in 1% increments). The
sum of the percentages across six events
must equal 100.
- % Top Blower (10-100% in 10% incr.)
- % Bottom Blower (10-100% in 10% incr.)
- % Microwave (0-100% in 10% incr.)
3. Use the Down key to move the cursor to the
"Warm Time" field.
NOTE: For ease of navigation, the R3 "Time" soft key
jumps the cursor to the warm time field.
4. Use the number keys to adjust the cook time.
5. Press the R2 soft key to save changes.
NOTE: For the save to take effect, the cursor must be
advanced past the field that was last edited.
6. If desired, press the R4 soft key to test-cook the
new settings. In doing so, the oven may require
additional warmup time.
7. When all editing is complete, return to the Set
Options screen and turn off the Edit Mode (see
page 12). This will allow access to the regular
cook mode.