Changing Ringer Melodies; Restoring The Base Station To The Factory Settings - Siemens Gigaset C385 Instruction Manual

Changing the system PIN
You can change the base station's 4-digit
default system PIN (0000) to a 4-digit PIN
known only to you.
¢ ¢
Settings
§Menu§
~
Enter the old system PIN and
press
§OK§
is shown as four asterisks
( **** ).
~
Enter your new system PIN
and press
a
Press and hold (idle status).
Resetting the system PIN
If you have forgotten the system PIN, you
can reset it to the original code 0000 by
resetting the base station to its default set-
tings. This will also reset every other
setting, see "Restoring the base station to
the factory settings"

Changing ringer melodies

u
Volume:
You can choose between five volumes
and the "crescendo" ring,
Select "0" to deactivate the base station
ringer melody.
u
Ringer melodies:
You can set a ringer melody for external
¢
calls, page 41.
¢ ¢
Settings
§Menu§
¢
/
Ringer Volume Ringer Melody
For how to adjust the settings,
¢
page 41.
¢
Base System PIN
. For security, the PIN
.
§OK§
¢
page 43.
¢
page 41.
¢
Base Audio Settings
Restoring the base station to the
factory settings
When restoring factory settings:
u
Handsets are de-registered from the
base.
– To de-register only the individual
handset, use the menu.
– To de-register all handsets from the
base, use the key on the base.
u
Individual settings are reset
u
All lists are deleted
u
The system PIN is reset to the original
code 0000
Only the date and time are retained.
Resetting the base station using the
menu
¢ ¢
Settings
§Menu§
Press the display key to
§OK§
confirm.
Resetting the base station using a key
on the base station
¤
Disconnect the power cord from the
base station.
¤
Hold down the Registration/Paging key
¢
( page 2) on the base station while
reconnecting the power cable to the
base station. Press and hold the key
until you hear a confirmation tone.
The base station has now been reset.
Base station settings
¢
Base Base Reset
43