Adjusting The Telephone; Operation On A Pabx - Siemens Euroset 5005 Installation Instructions Manual

Dialling pauses
One or more dialling pauses
(not at 1st digit) can be
entered using
are transferred to the memory
and are necessary for certain
extension systems (e.g.:
<
0 2368).
◆
Dialling a dialling pause
within the first 5 digits:
The entire number saved is
dialled, including the
2-second dialling pause.
◆
Dialling a dialling pause
after the first 5 digits:
The portion of the number
saved after the pause is
only dialled after pressing
<
the key.
Adjusting the
telephone
Setting the handset
volume
The handset volume can be
set to 2 levels.
E
Press Handset vol-
ume control key.
Mute
You can deactivate the tele-
phone's microphone.
During a call:
J
Press mute key.
To reactivate microphone:
Press the mute key again.
Setting the ringer
You can set the ringer fre-
quency and volume to 9 levels
Temporary DTMF switching in
"Pulse" position
To use functions that require
DTMF (e.g. remote control of
answering machine), you can
set the telephone to DTMF for
<
. Pauses
Pulse: Pulse dialling mode (DP)
Tone 1: Tone dialling mode, flash time
100 ms
Tone 2: Tone dialling mode, flash time
280 ms
3
EN
(factory default: level 6) or
turn it off.
c?
#
0 9
...
?

Operation on a PABX

Special functions/Recall
key
During an external call, you
can make an enquiry or for-
ward the call. To do this, press
the recall key
subsequent procedure
depends on your PABX.
By default, the recall key is set
to flash time 1 (pulse/tone
switch in "Tone 1" position).
For connection to a PABX, it
may be necessary to change
the flash time (e.g. pulse/tone
switch to "Tone 2"). To do this,
please refer to the operating
instructions for your PABX.
Changing the dialling
mode
By default, your telephone is
set to tone dialling mode
(Tone 1). Depending on the
dialling mode of your PABX,
you may need to set the tele-
phone to pulse dialling (DP).
Slide switch on underside of
unit:
the duration of the call with-
out adjusting the switch.
After the connection is estab-
lished:
*
After the connection is bro-
ken, the setting reverts to DP.
Lift the handset,
press the Set key.
Press the hash key.
Press one of the
number keys. (0:
Ringer off until
handset is next
lifted).
Press Set key.
>
. The
Press the star key.