Siemens Gigaset C385 Instruction Manual page 14

Attaching the belt clip
The handset has notches on each side to accommodate the belt clip.
¤
Press the belt clip onto the back
of the handset so that the
notches on the belt clip click
into position.
Placing the handset into the base station and registering
Insert handset
into base
Menu
Handset is
registering ë
Ð
Þ
Menu
If you purchased a model with multiple handsets, repeat the registration
process for each handset. Handsets are assigned the lowest available internal
number (1–4). If more than one handset is registered to the base station, the
internal handset number appears on the display (e.g.
bers 1–4 are already assigned to other devices, the handset currently being reg-
istered replaces the exiting
Before you can use the phone, you must
first register the handset to the base station.
¤
Place the handset with the display
facing up in the base station.
The handset registers automatically.
Registration can take up to 5 minutes.
Do not remove the handset from the base
station during this time.
The following is displayed after successful
V
registration:
u
The strength of the reception signal
between base station and handset:
– Poor to good: Ò Ñ i Ð
– No reception: | flashes
u
Battery charge status:
– = e V U (flat to full)
– = flashes: batteries almost flat
– e V U flashes: charging proce-
u
If the answering machine is activated,
the answering machine icon × will also
be displayed in the header.
INT 4 entry.
dure
2). If the internal num-
INT
First steps
13