Creating Ipv6 Pppoe Or Pppoe Dual Stack Wan Connection - D-Link DVG-N5402G/ACF User Manual

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual

Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection

To create a connection of the IPv6 PPPoE or PPPoE Dual Stack type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 72. The page for creating a new IPv6 PPPoE connection. The General settings section.
Parameter
Provider
Interface
Name
Enable
Direction
General settings
Leave the Manually value.
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 97 of 259
Configuring via Web-based Interface
Description