Security Settings - D-Link DVG-N5402G/ACF User Manual

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual

Security Settings

On pages of the Wi-Fi / Security settings section, you can modify security settings of the
WLAN. To configure the 2.4GHz band or 5GHz band, proceed to the relevant page.
By default, the WPA2-PSK network authentication type is specified for both bands of the WLAN.
WPS PIN from the barcode label is used as the network key.
In the BSSID drop-down list, the unique identifier of the Wi-Fi network is displayed. If your
network is split into parts, in the BSSID list, select the part for which the security settings should be
changed.
When you split the network into parts, an additional wireless network with the Open network
authentication type with no encryption is specified. It is strongly recommended to specify individual
security settings for your network.
Figure 114. The default security settings.
Page 142 of 259
Configuring via Web-based Interface