D-Link DVG-N5402G/ACF User Manual page 114

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Figure 90. The page for creating a new
Parameter
IP Address
Netmask
Gateway IP address
Primary DNS server/
Secondary DNS server
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Hostname
PPPoE + Static IP
IP
For PPPoE + Static IP type
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For PPPoE + Dynamic IP type
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
A name of the router specified by your ISP. Optional.
Page 114 of 259
Configuring via Web-based Interface
connection. The IP section.
Description