DIR-615A Wireless N300 Router
User Manual
Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection
To create a connection of the PPPoE IPv6 or PPPoE Dual Stack type, click the Add button on the
Connections Setup / WAN page in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 68. The page for creating a new PPPoE IPv6 connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 83 of 174
Configuring via Web-based Interface
Description