D-Link DVG-N5402G/ACF User Manual page 72

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
On the opened page, modify security settings of the guest network in the 2.4GHz band.
Select the Protected value from the Security mode drop-down list and enter a key (a password
that will be used to access your guest network) in the Network key field. Use digits and Latin
characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed authentication type is
specified for the router's guest network in the 2.4GHz band.
When the Open value is selected, the Network key field is unavailable. After applying this
setting, the Open authentication type with no encryption is specified for the router's guest network
in the 2.4GHz band.
Figure 48. Selecting a security mode for the guest network in the 2.4GHz band.
Click the Next button to continue.
On the next pages, specify a new name and configure security settings for the guest network
5GHz band. Then click the Next button.
After that the page displaying all specified settings opens. Make sure that they are correct, and then
click the Apply button, or the Back button to specify other settings. After clicking the button, the
page for configuring the router to use an IPTV set-top box opens (see the Configuring IPTV
section, page 73).
Page 72 of 259
Configuring via Web-based Interface
in the