D-Link DVG-N5402G/ACF User Manual page 227

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Parameter
Call forwarding number
Forwarding delay
DND
Anonymous call
blocking
Anonymous calling
Enable pound key
Advanced Transfer
A number to which the router redirects calls in accordance with the
mode selected from the Forwarding list.
A time period (in seconds) after which the router redirects calls to
the number specified in the Call forwarding number field. The
field is displayed if the If no answer value is selected from the
Forwarding list.
Do Not Disturb. Select the checkbox to reject all incoming calls (the
busy tone will be heard).
Select the checkbox to reject calls when the calling party conceals its
number.
Select the checkbox to conceal your number from the called party.
Select the checkbox to speed up dialing with pressing # (the pound
key) immediately after dialing numbers.
Select the checkbox to enable call switching with help of
combination of the FLASH key and number keys of the phone in
order to organize three-party calls.
Use of FLASH key
The Advanced Transfer function is enabled. The phone
•
connected to this line has an incoming call in the standby
mode and an outgoing call in the talk mode. It's needed to
press the FLASH key, hear the dial tone, and then press:
◦ the number key 1 in order to end the second call and
continue the first call,
◦ the number key 2 in order to put the second call on hold
and continue the first call,
◦ the number key 3 to have a three-party call with the first
and second speakers.
The Advanced Transfer function is not enabled. The phone
•
connected to this line has an incoming call in the standby
mode and an outgoing call in the talk mode. It's needed:
◦ to press the FLASH key in order to put the second call
on hold and continue the first call,
◦ to hang up the receiver in order to end both calls and
connect the first and second speakers to each other.
Page 227 of 259
Configuring via Web-based Interface
Description