Security Settings - D-Link DSL-G225 User Manual

Section 4 - Configuration
This page allows you to manually configure the router's wireless security settings. The page will change depending on the
selected authentication type.
Enable WPS: If you want to enable Wi-Fi Protected Setup (WPS), select Enable from the
drop-down menu.
Add Client: Select the desired WPS connection method, and click Add Enrollee to add
a new device using WPS. See Add Wireless Device with WPS on page 55
for more details.
Set WPS
Select the desired WPS AP mode.
AP Mode:
Device PIN:
If applicable, enter the WPS PIN.
Select SSID: Select your wireless SSID.
Network Select the desired security type. The remaining settings on the page will
Authentication: change depending on the type you select. Fill out these settings as required.
Click Apply when you are done.
D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
WPS SETUP
WIRELESS SSID
WIRELESS SECURITY MODE

Security Settings

55