Flight Mode; Replace The Battery; Talk On The Phone - Cochlear Baha 5 User Manual

Made for iPhone (MFi)
Your sound processor is a Made for iPhone (MFi)
hearing device. This allows you to control your
sound processor and stream audio directly from
iPhone, iPad or iPod touch. For full compatibility
details and more information visit www.cochlear.
com.
1. To pair your sound processor turn on
Bluetooth on your iPhone, iPad or iPod touch.
2. Turn off your sound processor and go to
Settings > General > Accessibility on your
iPhone, iPad or iPod touch.
3. Turn on your sound processor and select
Hearing Aids in the Accessibility menu.
4. When displayed, tap on the sound processor
name under "Devices" and press Pair when
prompted.

Flight mode

See figure
Wireless functionality must be deactivated when
boarding a flight.
5. To turn on Flight mode first turn off the sound
processor by opening the battery door.
6. Press and hold the program button and at the
same time, close the battery door.
7. To turn off Flight mode simply turn the sound
processor off and back on again.

Talk on the phone

For best results, use a Cochlear Wireless Phone
Clip or stream the conversation directly from your
iPhone. When using a normal handheld phone,
place the receiver near the microphone inlet of
your sound processor instead of near your ear.
Ensure the receiver does not touch the sound
processor as this may result in feedback.
6
6
See figure 7

Replace the battery

The visual indicators and beeps will alert you when
there is approximately one hour of battery power
remaining. At this time you may experience lower
amplification. If the battery runs down completely
the sound processor will stop working.
Use one of the batteries (zinc-air, non-
rechargeable) included in the sound processor kit
as a replacement. The batteries included in the
kit reflect Cochlear's latest recommendations.
Contact your hearing care professional for
additional batteries.
To replace the battery hold the sound
1
processor with the front facing up.
Gently open the battery door until it is
2
completely open.
Remove the old battery and dispose of it
3
according to local regulations.
Remove the new battery from the packet and
4
peel away the sticker on the + side.
Insert the battery into the battery
5
compartment with the + side facing up.
6 Gently close the battery door.
See figure 8