Update The Display Language; Using The Secure Digital Memory (Sd) Card; Updating Software - Hach sc200 User Manual

c. Make the desired changes and push ENTER to save the changes and return to the Inputs
Setting menu.

Update the display language

The display language can be changed through the Setup menu.
1. From the Settings Menu, select sc200 Setup and push ENTER.
2. Select Language and push ENTER.
The list of language options appears. English is the default language for the controller.
3. Highlight the language to be used for the controller and push ENTER.
The selected language is saved and is used for the controller display. The display returns to the
sc200 Setup menu.

Using the secure digital memory (SD) card

An SD card must be installed in the controller.
• The SD card can be used to update software and firmware and to download event and data logs. If
the SD card is installed while the controller is in the Settings Menu, push the HOME key and then
the MENU key to verify the option is visible. The SD icon will also be visible in the upper status bar
of the main measurement screen when a card is installed.
• Data log files on the SD card are available in XML and binary formats.
• DataCom is used to convert files from binary to CSV format. Refer to the DataCom manual for
more information on how to use the application. For a copy of the DataCom manual, software
updates or other downloadable resources, go to
Search DataCom or go to any sc200 product page.

Updating software

Notes:
• The controller does not automatically transfer information to or from an SD card.
• When the SD card is put in multiple controllers, each controller has a separate set of folders in the
SD card memory. To make sure software updates are in the correct folder for the controller in use,
it is best to use a separate dedicated SD card for each controller.
1. From the Settings Menu, select SD Card Setup and push the ENTER key.
2. Select Upgrade Software and push the ENTER key.
Note: If the Upgrade Software option does not appear, do the steps in
on page 44.
3. Select a device from the list and push the ENTER key. The list of options includes the controller
and all connected devices that have software placed in the appropriate folder on the SD card.
4. If more than one version of the upgrade software is available, select the version with the highest
number and push the ENTER key.
5. Push the ENTER key to begin the software transfer.
The display will show "Transferring files. Please wait..." The percentage of completion appears in
the bottom left corner of the display. The upgrade cannot be halted once it has begun.
• When the transfer is successful, the display will show "Transfer complete" along with a prompt
to push ENTER to restart the controller or to push the BACK key and exit to the SD Card
Setup menu. Controller updates take effect when the controller is restarted. A restart is not
necessary for sensor updates.
• If the transfer is unsuccessful, the display will show "Transfer failed" and an error message.
Press the ENTER key to acknowledge the warning and exit out of the menu. Error messages
are different for each sensor. Refer to the applicable sensor manual.
42 English
http://www.de.hach.com
Firmware updates with SD cards
or http://www.hach.com.