Dell PowerEdge R830 Owner's Manual page 89

3. processor
5. unlock icon
Figure 34. Removing a processor
1. close first socket-release lever
3. processor
5. processor shield
7. socket
Next steps
1. Replace the processor(s).
2. Install the heat sink.
3. Reinstall the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the cooling shroud
Removing a heat sink
Installing a heat sink
Installing the cooling shroud
After working inside your system
4. open first socket release lever
2. pin-1 indicator of processor
4. slot (4)
6. open first socket-release lever
8. socket keys (4)
89