System Cover; Removing The System Cover - Dell PowerEdge R830 Owner's Manual

Hide thumbs Also See for PowerEdge R830:
Table of Contents

Advertisement

Figure 11. Installing the optional front bezel
1.
bezel lock
Related links
Safety instructions

System cover

The system cover protects the components inside the system and helps in maintaining air flow inside the system. Removing the
system cover enables the intrusion switch that aids in maintaining system security.

Removing the system cover

Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
If installed, remove the optional bezel.
Steps
1.
Rotate the latch release lock counter clockwise to the unlocked position.
2.
Lift the latch toward the back of the system.
The system cover slides back and the tabs on the system cover disengage from the slots on the chassis.
NOTE: The position of the latch may vary depending on the configuration of your system.
3.
Hold the cover on both sides, and lift the cover away from the system.
58
2.
front bezel

Advertisement

Table of Contents
loading

Table of Contents