Dell PowerEdge R830 Owner's Manual page 152
Hide thumbs
Also See for PowerEdge R830:
- Getting started (8 pages) ,
- Quick start manual (8 pages) ,
- Getting started with your system (8 pages)
Table of Contents
Advertisement
3.
system board
Next steps
1.
Install the Trusted Platform Module (TPM). For information about how to install the TPM, see the Installing the Trusted
Platform Module section.
NOTE: The TPM plug-in module is attached to the system board and cannot be removed. A replacement TPM plug-
in module will be provided for all system board replacements where a TPM plug-in module was installed.
2.
Replace the following components:
a.
Cable retention bracket
b.
PCIe card holder
c.
Integrated storage controller card
d.
Internal USB key, if applicable
e.
Internal dual SD module
f.
All expansion card risers
g.
Heat sinks or heat sink blanks
h.
Processors or processor blank
i.
Memory modules and memory module blanks
j.
Network daughter card
k.
Cooling fan assembly
l.
Cooling shroud, if installed.
m.
Power supply unit
n.
Processor expansion module (if applicable)
3.
Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured using the cable
securing bracket.
4.
Follow the procedure listed in the After working inside your system section.
5.
Ensure that you:
a.
Use the Easy Restore feature to restore the Service Tag, iDRAC license, BIOS settings, onboard diagnostics, and optional
personality or ID modules. For more information, see the Easy restore section. If Easy Restore does not execute for any
reason you must:
1.
Enter the system Service Tag manually. For more information, see the Entering the system Service Tag section.
2.
Import your new or existing iDRAC Enterprise license. For more information, see Integrated Dell Remote Access
Controller User's Guide, at Dell.com/esmmanuals.
b.
Update the BIOS and iDRAC versions.
c.
Re-enable the Trusted Platform Module (TPM). For more information, see the Re-enabling the Trusted Platform Module
(TPM) section.
Related links
Safety instructions
Before working inside your system
Removing the system board
Restoring the Service Tag by using the Easy Restore feature
Entering the system Service Tag by using System Setup
Initializing the TPM for TXT users
After working inside your system
152
Advertisement
Table of Contents
Troubleshooting
