Cooling Fans - Dell PowerEdge R830 Owner's Manual
Hide thumbs
Also See for PowerEdge R830:
- Getting started (8 pages) ,
- Quick start manual (8 pages) ,
- Getting started with your system (8 pages)
Table of Contents
Advertisement
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
If applicable, route the cables inside the system along the chassis wall and secure the cables by using the cable-securing
bracket.
Steps
1.
Align the guide slots on the cooling shroud with the slots on the chassis.
2.
Lower the cooling shroud into the chassis until it is firmly seated.
Figure 23. Installing the cooling shroud
1.
slot on the chassis (4)
3.
cooling shroud
Next steps
1.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
After working inside your system
Cooling fans
Your system supports six hot-swappable cooling fans.
2.
touch point (2)
4.
guide slot on the cooling shroud (4)
69
Advertisement
Table of Contents
Troubleshooting
