Dell PowerEdge R830 Owner's Manual page 161
Hide thumbs
Also See for PowerEdge R830:
- Getting started (8 pages) ,
- Quick start manual (8 pages) ,
- Getting started with your system (8 pages)
Table of Contents
Advertisement
6.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
7.
Remove the system cover.
8.
Move the jumper on the system board jumper from pins 2 and 4 to pins 4 and 6.
9.
Install the system cover.
10. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
11. Assign a new system and/or setup password.
Related links
Removing the system cover
Installing the system cover
161
Advertisement
Table of Contents
Troubleshooting
