Trane Wireless Comm Installation, Operation And Maintenance Manual page 21

Note: To set up the addressing for this function, see
Figure 13. Wireless zone sensor/receiver association
Notes: To observe the radio signal strength between the sensor and receiver, press the Test
BAS-SVX40A-EN
Addressing, " p. 11.
button on the sensor. For more information about the wireless zone sensor, see the
current edition of Wireless Sensors: Installation, Operation, and Maintenance (BAS-
SVX04).
"Setting Wireless Zone Sensor Receiver
GRP NET
NWK
SNSR
CRD
OPEN NET
RX LINK
Establishing the Network
21