Table of Contents
Advertisement
Installation
Loosen the pan screw and turn the lens module left and right until the desired position is achieved; tighten the pan screw once completed.
Loosen the tilt screws on both sides of the camera, and turn the lens module up and down until the desired position is achieved; tighten
the tilt screws once completed.
Loosen the image adjustment screw and turn the lens to adjust the network camera's image until the desired orientation is achieved,
tighten the image adjustment screw once completed.
Loosen
Rotate 350°
Tilt 85°
Loosen the zoom controller and adjust the zoom factor by moving the
controller left and right until the desired range is achieved; tighten the
zoom controller once completed.
Loosen the focus controller and adjust the focus range by moving
the controller left and right until the image is clear; tighten the focus
controller once completed.
D-Link DCS-6112V /6113V User Manual
Adjust the viewing angle
Pan 350°
Tighten
Adjusting Zoom and Focus
Loosen
Tighten
A
Zoom
Focus
20
Advertisement
Table of Contents
