Table of Contents
Advertisement
Function
Enter the menu
Set seconds
54
10.7. Time set (example)
Time set.
1. Press MENU button. You can read
the display. The mnemonic is blinking.
2. You see on the display:
•
Pressing ▲ button you can increase or decrease the
selected digit:
,
,
,
,
•
Press ► button to select the next digit.
3. Pressing ▲ and ► buttons you can type in the supervisor
code.
4. Press MENU button. If you have typed the correct code
you see
(enter as user) or
supervisor) mnemonics for 2,5 seconds, after it you can see
ont he display
5. Entering bad code you can see on the display:
(Bad Code = bad code) mnemonic for 2,5 seconds, than the
instrument exit from this menu and the clock is going on.
Beguin the time set from point 1.
6. Enter the
button.
7. You can read the mnemonic
2,5 second, then appears the time in MM.SS format. The
decimal point is blinking.
8. Press the ▲ button to set the seconds to zero.
Between 0–29 seconds will round down, between 30–59
seconds will round up (11:59.25 » 11:59.00, or 11:59.37 »
12:00.00). This function can be used if the time hasn't been
set, you can read
isn't accurate.
. The left digit is blinking.
,
,
,
,
,
.
menu item by pressing the ENTER
on the display, or when the time
DT9100 B
mnemonic on
, etc.
(enter as
on the display for
20140130-V0
Advertisement
Table of Contents
