Time Set (01. Menu Item) - Datcon DT9100 B Operating Instructions Manual

Function
Sequence of operations 1. Enter the menu by the user or the supervisor code.
30

7.3. Time set (01. menu item)

Time set either with setting the seconds to zero or not.
Chapter7.1. Typing the code (password) in describes how
you can type the code in. You see on the display:
2. Enter the given menu item by pressing the ENTER
button.
3. You can read the mnemonic
2,5 second, then appears the time in MM.SS format. The
decimal point is blinking.
4. Press the ▲ button to set the seconds to zero.
Between 0–29 seconds will round down, between 30–59
seconds will round up.
5. Press MENU button to set the time (if no need to set
seconds to zero).
First you can set the hours:
Press the ▲ button to increase the hours, press the ENTER
button to decrease the hours.
6. Press the MENU button, now you can set the minutes:
Press the ▲ button to increase the minutes, press the
ENTER button to derease the minutes.
While setting the time the clock continues to count the
seconds. It is a useful function when you set the clock from
winter time to summer time or vice versa.

on the display for
20140130-V0
DT9100 B

.