Table of Contents
Advertisement
DT9100 B
The display
In the case of an error
message
20140130-V0
6. Display and manual controls
6.1. The first start-up
The display is indicated by the arrow (1)
After the instrument has been installed and connected to
the power supply, first you see on the display:
Type of instrument:
Type of power supply:
Initialization:
Factory default:
If anything else appears on the display instead of the
numbers showing the current value (e.g. a message with
blinking letters), then it is an error message of the
instrument.
In order to define the error more accurately, please go to
Chapter 10.3. Error messages or 10.4. Messages of
critical errors, found at the end of this Manual, in the
Appendix.
,
23
Advertisement
Table of Contents
