Table of Contents
Advertisement
The display
In the case of an error
message
22
6. Display and manual controls
6.1. The first start-up
The display is indicated by the arrow (1)
When the instrument has been installed and connected to
the power supply, you see on the display first the:
Type of instrument:
Type of power supply:
Initialization:
Factory default:
If anything else appears on the display instead of the
numbers showing the current value (e.g. a message with
blinking letters), then it is an error message of the
instrument.
In order to define the error more accurately, please go to
Chapter 10.3. Error messages or 10.4. Messages of critical
errors, which can be found at the end of this Manual, in the
Appendix.
,
DT9102 B
20180905-V120180905
Advertisement
Table of Contents
