Onboard Super I/O Device - Viglen VIG556M Manual

I/O Device Configuration
Figure 23: OnChip PCI Device
Onboard FDC Controller: Enables the Floppy Disk Controller.
Onboard Serial Port ½: Enables the serial ports on the motherboard
UART Mode Select: Sets the mode for the serial port.
Onboard Parallel Port: Sets the IRQ for the Parallel port
Parallel Port Mode: Sets the mode for the Parallel port.
ECP Mode Use DMA: Sets the DMA used by the Parallel port.
56
V1.0 VIG556M Motherboard Manual