Table of Contents
Advertisement
NOTE:
Except when clearing the rtc ram, never remove the jumper on JP1 default
position. Removing the jumper will cause system boot failures.
Table 5: Front Panel Audio Jumper Settings
Function
Normal
Table 5a: Front panel Audio Connector
Pin
1
3
5
7
9
CAUTION!
Do not move the jumper with the power on. Always turn off the power and unplug
the power cord from the computer before changing the jumper
NOTE:
There is no jumper setting for configuring the processor speed or bus
frequency.
V1.0
Jumper
Configuration
5 – 6
The audio line signals are routed back to
the line connector.
and
9- 10
Signal name
Pin
Audio Mic
2
Audio Mic Bias
4
Speaker Out
6
Right Channel
X
8
Speaker Out Left
10
Channel
VIG556M Motherboard Manual
Signal name
Ground
VCC
Speaker Out
Right Channel
Return
Key
Speaker Out
Left Channel
Return
.
24
Advertisement
Table of Contents
