Front Panel Connectors - Viglen VIG556M Manual

Front Panel Connectors

The following are all connectors situated along the front edge of the motherboard.
They are often connected to buttons and LED's situated on the front panel.
JFP1 JFP2
Figure 5: Front panel connectors
Hard Disk L.E.D. Connector
This goes to the Hard Disk L.E.D. on the front panel, which lights up when the IDE
Hard Disk is in use.
Reset switch connector
When these pins are shorted, it will cause the computer to perform a cold reboot.
Power L.E.D.
This attaches to the power L.E.D on the front panel, to display if the computer is
active or not. You can attach either a three pin LED or a 2 pin depending on what the
case is supplied with.
Power On/Off
When these pins are shorted it turns the computer on or off.
26
V1.0 VIG556M Motherboard Manual