Pm Wakeup Events - Viglen VIG556M Manual

Wake up Event Setup
Phoenix – AwardBIOS CMOS Setup Utility
Resume From S3 By USB Device
Resume By PS/2 Keyboard
Resume By PS/2 Mouse
Resume By PCI Device(PME#)
MACPME Power Up Control
Resume By RTC Alarm
x Month Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
↑↓→←:Move
Enter:Select
F5:Previous Values
Resume From S3 By USB Device: Allows a USB device to wake the system
Resume By PS/2 Keyboard: Allows a PS/2 keyboard to wake the system by either
a hot key combination or any key that is pressed. The default is [Any Key].
Resume By PS/2 Mouse: Allows a PS/2 mouse to wake the system by either just
movement or movement and a click. The default is [Move & Click].
Resume By PCI device (PME#): Wakes the system from power saving mode when
a signal is received from a specific hardware peripheral or component.
MACPME Power Up Control: This is WOL function.
Resume By RTC Alarm: Allows an alarm time to be set to wake the system.
V1.0
Wake up Event Setup
Enabled
Any Key
Move & Click
Enabled
Disabled
Disabled
NA
0
0 : 0 :
+/-/PU/PD:Value F10:Save
Figure 25: Onboard PCI Device
VIG556M Motherboard Manual
Menu Level
40
ESC:Exit
F7: Optimized Defualts
Item Help
►►
F1:General Help
58