Viglen VIG556M Manual page 40

When the BIOS update process is complete, the utility reboots the system.
Once the system has been restarted it will hold on the Pre-BIOS screen. At this
stage the following need to be completed before starting windows.
1. The system will halt on pre-BIOS, at this point you need to shut the machine
down.
2. Reboot the computer.
3. System will holt on the pre-BIOS screen and display an error message
(CMOS checksum error – Defaults loaded)
4. Enter the BIOS setup by pressing DEL
5. Once in the setup load the optimized settings by selecting 'Load Optimized
Defaults'
6. Exit the setup by selecting 'Save & Exit setup'.
7. Now boot in to windows.
When you reboot the system it will hold on the Pre-BIOS screen. At this stage there
will be an error message shown and details of the current BIOS. Check the BIOS
version. The BIOS version is made up of the BIOS file name, version, build and time
of flash. E.g.
W7103SMS V1.0 121404 14:27:50
The V number is the version, in this case Version 1.0.
This requires the user to choose one of two options. Either F1 to continue with the
default BIOS settings loaded or DEL to enter the BIOS setup.
Enter the BIOS setup and select 'load optimized default'. Then select 'Save & Exit
setup'.
V1.0 VIG556M Motherboard Manual
39