Upload; Accessing Upload - NEC SL2100 Programming Manual

Issue 1.0
S 4 U
ECTION PLOAD
Uploading pushes all the data from PCPro to system memory. An upload can only
occur when PCPro is connected to a system.
4.1
B-12
3.2.1 Transfer Type
Select a filter that controls the scope of settings to download. The following
Transfer Types are made available.
All: No filter, all chassis settings.

Card Configuration: Card package settings.

System Data Partial (System Wide): System-based settings.

System Data Partial (Telephone): Telephone-based settings.

System Data Partial (Virtual Extension): Virtual Extension-based

settings.
System Data Partial (Trunk): Trunk-based settings.

Transfer Type Items
Specifically select PRG Groups and/or individual PRGs from the chassis
settings to download. The choice of Transfer Type Items available is
governed by the Transfer Type selected.
Modify Filters
A filter is applied based on the system data modification status. The filter
only applies to system data on the PCPro side, not system data residing in
chassis memory. Refer to

Accessing Upload

When PCPro is connected to a system, access the Upload dialog using one of the
following methods:
Select the menu item Home:Communication > Upload.

-- or --
Select the icon depicting the red arrow

-- or --
Press F7.

- Modification History for further information.
.