Accessing Feature Activation; Manually Activating A Feature - NEC SL2100 Programming Manual

Issue 1.0
2.1
2.2
G-2

Accessing Feature Activation

When PCPro is connected to a chassis, access the Feature Activation dialog
by selecting the menu item Home > Maintenance > Feature Activation.

Manually Activating a Feature

Manual Activation does not require that you have an Internet connection.
However, you must have previously downloaded the license file that was
generated by the NEC Product License Server. The license file contains the
Software Code, which is required to activate the feature.
To activate a feature manually:
1. Launch PCPro and access Feature Activation (refer to
Feature Activation).
2. If connected to the SL2100 system, the Hardware Code is retrieved and
displayed.
3. Click Load File (refer to
on page G-3).
This file can reside on the PC or you can copy it to a flash drive to
reference if activating other locations.
CAUTION
Figure G-2 Feature Activation Open File Dialog
2.1 Accessing