ABB RED615 Product Manual page 5

ABB
Line Differential Protection and Control
RED615
Product version: 4.0
Table 2. Supported functions, continued
Functionality
Master trip, instance 1
Master trip, instance 2
Control
Circuit-breaker control
Disconnector control, instance 1
Disconnector control, instance 2
Earthing switch control
Disconnector position indication, instance 1
Disconnector position indication, instance 2
Disconnector position indication, instance 3
Earthing switch indication, instance 1
Earthing switch indication, instance 2
Auto-reclosing
Condition Monitoring
Circuit-breaker condition monitoring
Trip circuit supervision, instance 1
Trip circuit supervision, instance 2
Current circuit supervision
Protection communication supervision
Measurement
Disturbance recorder
Three-phase current measurement, instance 1
Sequence current measurement
Residual current measurement, instance 1
Residual voltage measurement
● = included, o = optional at the time of order
1) The instances of a protection function represent the number of identical function blocks available in a standard configuration. By setting the
application specific parameters of an instance, a protection function stage can be established.
2) One of the following can be ordered as an option; Admittance based E/F, Wattmetric based E/F or Harmonics based E/F. The option is an addition to
the existing E/F of the original configuration. The Admittance based and Wattmetric based optional E/F has also a predefined configuration in the
relay. The optional E/F can be set on or off.
3) Io selectable by parameter, Io measured as default.
4) Uo measured is always used.
5) Io measured is always used.
6) Available in IED and SMT but not connected to anything in logic.
7) Io selectable by parameter, Io calculated as default.
8) Io calculated is always used.
1MRS756500 F
A B C
● ● ●
● ● ●
● ● ●
6) 6) 6)
● ● ●
6) 6) 6)
● ● ●
6) 6) 6)
● ● ●
● ● ●
6) 6) 6)
● ● ●
6) 6) 6)
● ● ●
● ● ●
6) 6) 6)
● ● ●
- o o
- ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
- ● ●
- ● -
5