Table of Contents
Advertisement
1. Introduction
The MEESEC-K series is equipped with an instruction function convenient for machine control,
so that even complicated control can be programmed easily.
The program language uses language for sequence control (a combination
of
relay symbol format
and logic symbol words), so that language of the same system as for the conventional MELSEC-
007B and 008 is followed, but the symbols have been partly changed
to
more general expressions,
Example
(
Example
7
(1) ANS
-
ANB, ORS
-
ORB
(2) Input/output device name: I000
3
X O O O
i
0000 * YO00
and sequence instructions and data handling instructions have been newly added.
[Example: Universal shift, conditional jump, pulse instructions, addition and subtraction,
magnitude comparison, data movement (MOV), etc.]
In this way, the series K is
a
programmable controller with a powerful program function. Please
study this manual carefully to master the programming methods, so that the functions can be
used efficiently.
For program input and output operations, refer to the "Handling
instructions for the programming unit".
--.
NOTES:
(1) This programming manual covers the basic functions of the
KOJ, KO,
K1, K2, KOE and
K2E.
(2) The K2CPU-S3 is provided with special funcitons.
Refer to the "Instruction Manual
-
Special Functions of the K2CPU-S3" for the program-
ming of the special functions.
Refer to the "Instruction Manual
-
Special Functions of the
KOJ"
for the programming of
the speicial functions.
"
(3) The KOJ is provided with special functions.
- 1 -
Advertisement
Table of Contents
