Dnp Protocol Settings; Dnp Communication - GE 350 Communications Manual

CHAPTER 2: RS485 INTERFACE

DNP protocol settings

DNP communication

S1 DNP
DNP GENERAL
DNP UNSOL RESPONSE*
DEFAULT VARIATION
▼
DNP CLIENT ADDRESS*
DNP POINTS LIST
898769A1.cdr
350 FEEDER PROTECTION SYSTEM – COMMUNICATIONS GUIDE
Figure 2-1: DNP communication menu
The following path is available using the keypad. For instructions on how to use the
keypad, please refer to Chapter 3 - Working with the Keypad.
PATH:
SETPOINTS > RELAY SETUP > COMMUNICATIONS > DNP PROTOCOL > DNP GENERAL
To view the list of DNP Binary Inputs please refer to the Format Codes section - FC134B - of
this Guide.
S1 DNP GENERAL
DNP ADDRESS
▼
DNP TCP/UDP PORT
CHANNEL 1 PORT
CHANNEL 2 PORT
TME SYNC IIN PER.
DNP MSG FRAG SIZE
DNP TCP CONN. T/O
DNP UNSOL RESPONSE*
FUNCTION
▼
TIMEOUT
MAX RETRIES
DEST ADDRESS
DEFAULT VARIATION
DNP OBJECT 1
▼
DNP OBJECT 2
DNP OBJECT 20
DNP OBJECT 21
DNP OBJECT 22
DNP OBJECT 23
DNP OBJECT 30
DNP OBJECT 32
DNP CLIENT ADDRESS*
CLIENT ADDRESS 1
▼
CLIENT ADDRESS 2
CLIENT ADDRESS 3
CLIENT ADDRESS 4
CLIENT ADDRESS 5
S1 DNP POINTS LIST
BINARY INPUTS
BINARY OUTPUTS
ANALOG INPUTS
DNP PROTOCOL SETTINGS
POINT 0
▼
POINT 1
POINT 2
...
POINT 63
POINT 0 ON
▼
POINT 0 OFF
POINT 1 ON
POINT 1 OFF
...
POINT 15 ON
POINT 15 OFF
POINT 0 ENTRY
▼
POINT 1 ENTRY
POINT 2 ENTRY
...
POINT 31 ENTRY
2–5