Chrysler Pacifica 2017 User Manual page 89

Hide thumbs Also See for Pacifica 2017:
Table of Contents

Advertisement

Rear Heated Seats — If Equipped
On some models, the second row seats are equipped with heaters. There are two heated seat
switches that allow the second row passengers to operate the seats independently. The heated
seat switches are located on the sliding side door handle trim panels.
You can choose from HI, LO or OFF heat
settings. Amber indicator lights in each switch
indicate the level of heat in use. Two indicator
lights will illuminate for HI, one for LO and
none for OFF.
Push the switch once to select HI-level heating.
Push the switch a second time to select LO-
level heating. Push the switch a third time to
shut the heating elements OFF.
NOTE:
Once a heat setting is selected, heat will be felt
within two to five minutes.
When the HI-level setting is selected, the heater will provide a boosted heat level during the initial
stages of operation. Then, the heat output will drop to the normal HI-level. If the HI-level setting
is selected, the system will automatically switch to LO-level after approximately 60 minutes of
continuous operation. At that time, the display will change from HI to LO, indicating the change.
The LO-level setting will turn OFF automatically after approximately 45 minutes.
Ventilated Seats — If Equipped
Located in the first row seat cushions are small fans that draw the air from the passenger compart-
ment and move air through fine perforations in the seat cover to help keep the driver and front
passenger cooler in higher ambient temperatures. The fans operate at two speeds, HI and LO.
The front ventilated seats control buttons are located within the climate or controls screen of the
touchscreen.
• Press the ventilated seat button
• Press the ventilated seat button
• Press the ventilated seat button
NOTE:
The engine must be running for the ventilated seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the ventilated seats can be programed to come
on during a remote start.
This feature can be programmed through the Uconnect system. Refer to "Uconnect Settings" in
"Multimedia" in the Owner's Manual on www.chrysler.com/en/owners/manuals for further infor-
mation.
G E T T I N G S T A R T E D
Second Row Heated Seat Switch
once to choose HI.
a second time to choose LO.
a third time to turn the ventilated seat OFF.
87

Advertisement

Table of Contents
loading

Table of Contents