Display Settings - Chrysler Pacifica 2017 User Manual

Display Settings

When watching a video source, pushing "Settings"
Settings menu. These settings control the appearance of the video on the screen. The factory
default settings are already set for optimum viewing, so there is no need to change these settings
under normal circumstances.
To change the settings, use one of the touchscreens. To reset all values back to the original
settings, select the "Reset to Defaults" then select "YES."
Wireless Streaming/Mirroring — If Equipped
Your Uconnect Theater System may be equipped with Wireless Streaming/Mirroring function-
ality that allows you to project your smartphone or tablet onto your rear Uconnect Theater
touchscreens.
Look for the Wireless Streaming/Mirroring Source Card on your rear Uconnect Theater touch-
screen, or as a source in the Uconnect Theater menu on the front Uconnect 8.4/8.4 NAV
touchscreen. This Source Card will allow you to wirelessly link your compatible Android devices
to your Uconnect Theater system and stream your device onto the touchscreens.
NOTE:
For system compatibility, consult your device's owner's manual to see if your device supports
mirroring technology compatibility. Apple devices do not support this feature.
To link your device to the rear Uconnect Theater touchscreens:
1. Enable your device's Wi-Fi
2. Enable the Wireless Streaming/Mirroring feature on your device
NOTE:
Refer to your device's user manual for further information.
3. Select the Pacifica Wireless Network from the list of available networks on your device
4. When prompted by an Authentication Screen, press Accept on the touchscreen to begin
mirroring your device
5. Press the Select Input menu or the Wireless Streaming/Mirroring Source Card to select your
device
NOTE:
The Authentication Screen will appear on both touchscreens. The touchscreen screen on which
"Accept" is selected will be the primary controller for the mirroring session.
NOTE:
• Some devices will allow you to control your device through the Uconnect Theater rear
touchscreens. They will react to your selections from the touchscreen and be represented on
your device as well. When supported, the Uconnect Theater task bar will appear at the top and
bottom of the Uconnect Theater touchscreen, framing your mirrored device.
• Devices that do not support this feature will not respond to touchscreen use once paired and
must be controlled using the device.
E L E C T R O N I C S
icon on the touchscreen activates the
201