Chrysler Pacifica 2017 User Manual page 219

Vacuum Troubleshooting
• DO NOT use with any opening blocked. If an object becomes lodged in the hose, attempt to
fully extend the hose in a straight line while the vacuum motor is running. If this does not
dislodge the object, turn the vacuum OFF and remove the hose from the vehicle following the
removal instructions below. If the filter is clogged, follow the emptying debris bin procedure
and lightly tap the filter on the collection bin to remove any collected debris from the filter.
Both the bin and the filter can be rinsed with water if needed. To avoid mold and stale odors,
allow both to dry completely before reinstalling in your vehicle. If filter has tears, holes or other
damage and needs to be replaced, please contact your authorized dealer.
• If there are any other issues with your vacuum, contact your authorized dealer. Your vacuum
has no user serviceable parts.
Debris Bin
The debris bin is located behind the lower access panel behind the third row seat on the driver's
side.
To Empty
1. Push power button to turn vacuum OFF.
2. Open the lower access panel by pulling the finger grip towards you and then pull downward.
Vacuum System Access Panels
1 — Upper Access Panel
2 — Lower Access Panel
U T I L I T Y
217