Chrysler Pacifica 2017 User Manual page 250

W H A T T O D O I N E M E R G E N C I E S
4. Place the Tire Service Kit on the ground next to the deflated tire.
5. Engage parking brake before turning the engine ON.
6. Always start the engine before turning ON the Tire Service Kit.
7. Turn the Mode Select Knob to Air Mode position.
NOTE:
Do not fill inflatable spare tire with sealant. Refer to "Tire Service Kit" in this chapter for repairing
tires.
8. Switch the power button ON.
9. Inflate the tire to 60 psi (4.2 Bar) recommended as per the label on the wheel or if the vehicle
equipped with the inflatable spare tire pressure indicated on the Tire and Loading information
label located on the driver-side door opening.
NOTE:
If the tire is over inflated, use the deflation button to reduce the tire air pressure.
10. After the tire reaches the recommended pressure, lower the vehicle with the jack as described
in the Jack Instructions section in this manual.
11. Remove the speed limit label sticker from the Tire Service Kit and place it on the center of the
steering wheel.
12. Return the Tire Service Kit to the foam tray and secure it with the strap. Store the foam tray
in the cargo area.
Return Inflatable Spare Tire
To return Inflatable Spare Tire to its storage location.
1. Return the Jack.
2. Deflate the spare tire. Use the Tire Service Kit or Portable Air Compressor and push the
deflation button to do this step. Refer to "Tire Service Kit" or "Portable Air Compressor" if
equipped in this section for additional information. The inflatable spare tire will return to its
original shape.
3. Install the inflatable spare tire back into its original stowage location and position facing
outward.
4. Install the foam tray with wrench and funnel installed.
5. Install and tighten the wing nut by hand.
6. Install the Tire Service Kit or Portable Air Compressor if equipped and tighten the strap.
7. Install access panel door.
248