Remote Start - If Equipped; Vehicle Security Alarm - Chrysler Pacifica 2017 User Manual

Hide thumbs Also See for Pacifica 2017:
Table of Contents

Advertisement

REMOTE START — IF EQUIPPED
Push and release the remote start button
the remote start button a third time shuts the engine off.
To drive the vehicle, push the unlock button on the key fob, place the ignition in the ON/RUN
position by pushing the keyless push button.
With Remote Start, the engine will only run for 15 minutes (timeout), unless the keyless push
button ignition is placed in the ON/RUN position.
The vehicle must be started with the keyless push button ignition after two consecutive timeouts.
• Do not start or run an engine in a closed garage or confined area. Exhaust gas contains
Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous
and can cause you or others to be severely injured or killed when inhaled.
• Keep key fobs away from children. Operation of the Remote Start System, windows, door
locks or other controls could cause you and others to be severely injured or killed.

VEHICLE SECURITY ALARM

The vehicle security alarm monitors the vehicle doors for unauthorized entry and the ignition for
unauthorized operation. While the vehicle security alarm is armed, interior switches for door locks
and liftgate release are disabled. If something triggers the alarm, the vehicle security alarm will
provide the following audible and visible signals: the horn will pulse, the park lamps and/or turn
signals will flash, and the vehicle security light in the instrument cluster will flash.
To Arm Your Alarm
Push the keyless ignition push button until the instrument cluster display indicates that the vehicle
ignition is OFF. Push the power door lock switch while the door is open, push the key fob lock
button, or with one of the key fobs located outside the vehicle and within 5 ft (1.5 m) of the
driver's and passenger front door handles, push the passive entry button located on the door
handle.
NOTE:
After pushing the key fob lock button, you must wait two seconds before you can lock or unlock
the vehicle via the door handle.
To Disarm Your Alarm
Push the unlock button on the key fob or with the key fob located outside the vehicle and within
5 ft (1.5 m) of the driver's and passenger front door handles, grab the Keyless Enter-N-Go —
Passive Entry door handle and enter the vehicle. Then, push the keyless push button ignition
(requires at least one valid key fob in the vehicle).
G E T T I N G S T A R T E D
on the key fob twice within five seconds. Pushing
WARNING!
17

Advertisement

Table of Contents
loading

Table of Contents