Chrysler Pacifica 2017 User Manual page 67

Third Row Tether Attachment
The tether anchorage found on the back of the 60% seat in the third row may be used by either
the left outboard or the center seating position. Only tether one child restraint to the tether
anchorage at a time.
To connect the tether strap hook to the tether anchorage for either seating position on the 60%
third row seat:
1. Route the tether strap to provide the most direct path for the strap between the anchor and the
child seat.
2. If the car seat is in the center, raise the center head restraint and route the tether strap around
the inboard (left) side of the head restraint support posts, as shown in the diagram.
3. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the
diagram.
4. Remove slack in the tether strap according to the child restraint manufacturer's instructions.
Center Tether Attachment – 3rd Row
Do not connect the tether strap for more than one child restraint to the tether anchorage on
the 60% seat in the third row. This anchorage is intended for one child restraint at a time.
G E T T I N G S T A R T E D
Outboard Tether Attachments – 3rd Row
WARNING!
65