Chrysler Pacifica 2017 User Manual page 62

G E T T I N G S T A R T E D
Please see the table below and the following sections for more information.
Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle
7 Passenger LATCH Positions
ALR = Switchable Automatic Locking Retractor
— Top Tether Anchorage Symbol
What is the weight limit (child's
weight + weight of the child
restraint) for using the Tether
Anchor with the seat belt to
attach a forward facing child
restraint?
Can the rear-facing child re-
straint touch the back of the
front passenger seat?
Can the head restraints be
removed?
Can the buckle stalk be twisted
to tighten the seat belt against
the belt path of the child
restraint?
NOTE:
If the folding, non-adjustable head restraint interferes with the installation of the child restraint,
the head restraint may be folded and the child seat installed in front of it.
60
Frequently Asked Questions
Weight limit of the
Child Restraint
Yes
Yes
No
8 Passenger LATCH Positions
Always use the tether anchor
when using the seat belt to
install a forward facing child
restraint, up to the recom-
mended weight limit of the
child restraint.
Contact between the front
passenger seat and the child
restraint is allowed, if the child
restraint manufacturer also
allows contact.
The 2nd row head restraints on
bench and fixed quad seats,
and in the center seat (if
equipped) are removable. 2nd
row stow 'n go head restraints
are not removable. The 3rd
row center head restraint is
removable in all vehicles, but
the 3rd row outboard head
restraints are not removable.
Do not twist the buckle stalk in
a seating position with an ALR
retractor.