Chrysler Pacifica 2017 User Manual page 32

G E T T I N G S T A R T E D
6. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a
"click."
7. Position the lap belt so that it is snug and lies
low across your hips, below your abdomen.
To remove slack in the lap belt portion, pull
up on the shoulder belt. To loosen the lap
belt if it is too tight, pull on the lap belt. A
snug seat belt reduces the risk of sliding
under the seat belt in a collision.
8. Position the shoulder belt on your chest so
that it is comfortable and not resting on your
neck. The retractor will withdraw any slack in
the seat belt.
9. To release the seat belt, push the red button
on the buckle.
10. To disengage the mini-latch plate from the
mini-buckle for storage, insert the regular
latch plate into the center red slot on the mini-buckle. The seat belt will automatically retract
to its stowed position. If necessary, slide the latch plate down the webbing to allow the seat
belt to retract fully. Insert the mini-latch plate and regular latch plate into its stowed position.
• If the mini-latch plate and mini-buckle are not properly connected when the seat belt is used
by an occupant, the seat belt will not be able to provide proper restraint and will increase the
risk of injury in a collision.
• When reattaching the mini-latch plate and mini-buckle, ensure the seat belt webbing is not
twisted. If the webbing is twisted, follow the preceding procedure to detach the mini-latch
plate and mini-buckle, untwist the webbing, and reattach the mini-latch plate and mini-
buckle.
30
Mini-Latch And Buckle Connected
WARNING!