Sony PXW-Z450 Operating Instructions Manual page 140

140 000
11. Appendix: Messages Displayed During Operation
Operation
Assignable switch assigned with Shot Mark2
was operated
Assignable switch assigned with Clip Flag
OK was operated
Assignable switch assigned with Clip Flag
NG was operated
Assignable switch assigned with Clip Flag
Keep was operated
Assignable switch assigned with Flash Band
Reduce was operated
SLOT SELECT button was operated
Message Meaning and possible cause
Shot Mark2 Shot mark 2 was added.
(arbitrary character string when defining
planning metadata)
Cannot Record Essence Mark Cannot add because the maximum number of essence marks has been reached.
Reached Essence Mark Limit
Cannot Proceed Cannot add because of the following conditions.
• Cannot write because the media on which to record clips is write-protected
• Picture Cache Rec function is set to On
• Interval Rec recording is in progress
• Media is write-protected
• Target clip is recorded on an SDXC card
OK Clip Flag Clip flag (OK mark) was added.
Delete Clip Flag Clip flag (OK mark) was deleted (by pressing the switch twice).
Cannot Proceed Cannot execute because of the following conditions.
• Media is write-protected
• Target clip is recorded on an SDXC card
NG Clip Flag Clip flag (NG mark) was added.
Delete Clip Flag Clip flag (NG mark) was deleted (by pressing the switch twice).
Cannot Proceed Cannot execute because of the following conditions.
• Media is write-protected
• Target clip is recorded on an SDXC card
KEEP Clip Flag Clip flag (KEEP mark) was added.
Delete Clip Flag Clip flag (KEEP mark) was deleted (by pressing the switch twice).
Cannot Proceed Cannot execute because of the following conditions.
• Media is write-protected
• Target clip is recorded on an SDXC card
Flash Band Reduce: On Flash Band Reduce was set to On.
Flash Band Reduce: Off Flash Band Reduce was set to Off.
Switched Slot Recording media to use was changed.