Sony PXW-Z450 Operating Instructions Manual page 136

136 000
11. Appendix: Messages Displayed During Operation
Operation
GAIN switch was operated
DCC switch was operated
White balance switch was operated
SHUTTER switch was operated
Menu knob was turned
Auto black switch was operated
Message Meaning and possible cause
Gain: xxxxdB Gain setting was changed.
(where "xxxx" is the gain value)
DCC: On DCC was set to On.
DCC: Off DCC was set to Off.
Fixed By Hyper Gamma ! Cannot set DCC to On because Gamma Category is set to HG or User.
White: Preset xxxxK White balance was changed to the preset value.
(where "xxxx" is the color temperature
value)
White: A xxxxK White balance was changed to the memory A value.
(where "xxxx" is the color temperature
value)
White: B xxxxK White balance was changed to the memory B value.
(where "xxxx" is the color temperature
value)
White: ATW xxxxK White balance mode was changed to ATW.
(where "xxxx" is the color temperature
value)
Shutter: 1/xxxx Shutter speed was changed (standard, Speed mode settings).
(where "xxxx" is the shutter value)
Shutter: xxxx Shutter speed was changed (standard, Angle mode settings).
(where "xxxx" is the shutter value)
ECS: xxxxHz Shutter speed was changed (ECS mode).
(where "xxxx" is the frequency value)
ECS: xxxxHz Shutter speed was changed (ECS mode).
(where "xxxx" is the frequency value)
Iris Override: +x.xx Iris override level was changed.
(where "x.xx" is a numeric value)
Color Bars Cannot execute because a color bar signal is being output.
Cannot Proceed
Test Saw Cannot execute because a test signal is being output.
Cannot Proceed
Not Available Cannot execute because recording is in progress.
Recording
Not Available Cannot execute because playback is in progress.
Playing back
Not Available Cannot execute because the thumbnail screen is displayed.
Displaying Thumbnails