Sony PXW-Z450 Operating Instructions Manual page 107

107 000
7. Menu Display and Settings: Menu List
Maintenance >Basic Authentication
Makes settings related to basic authentication.
Item Setting
User Name (Displays the current user name.) Sets the user name (arbitrary name for basic
Password *******
Maintenance >Network
Makes settings related to network connections.
Item Setting
Setting On/Off
Wireless Network Wi-Fi Access Point/Wi-Fi Station/
Modem/Off
NFC Execute/Cancel
WPS Execute/Cancel
Channel Auto(5GHz)/Auto/CH1/CH2/
CH3/CH4/CH5/CH6/CH7/CH8/
CH9/CH10/CH11
SSID & Password (SSID display)
(Password display)
Device Name (Wireless)
IP Address (Wireless)
Subnet Mask (Wireless)
MAC Address (Wireless)
Regenerate Password Execute/Cancel
Wired LAN Enable/Disable
Wired LAN Remote On/Off
Description
authentication). Set to "admin" by factory default.
Sets the password (for basic authentication). Set
to "pxw-z450" by factory default.
Description
Turns the network function on/off.
Sets the operating mode for wireless LAN
connections.
Initiates a one-touch connection using NFC
(execute by selecting Execute).
Starts Wi-Fi Protected Setup (WPS) (execute by
selecting Execute).
Sets the wireless LAN channel.
[Note]
"Auto(5GHz)" may not be displayed, depending on the
wireless LAN module used.
Displays the SSID and password.
Displays the name of network device attached to
the USB wireless LAN module connector
Displays the IP address when connected to a
wireless LAN.
Displays the subnet mask when connected to a
wireless LAN.
Displays the MAC address of the USB Wireless LAN
Module attached to the camcorder.
Regenerates a password (execute by selecting
Execute).
Enables/disables wired LAN connection.
If connected to a network using a LAN cable,
operation from a Wi-Fi remote control, web
menu, and "Content Browser Mobile" is enabled.
Maintenance >Network
Makes settings related to network connections.
Item Setting
Wired LAN Detail DHCP (On/Off)
Settings
IP Address (DHCP/On:
automatically, DHCP/Off:
192.168.2.50)
Subnet Mask (DHCP/On:
automatically, DHCP/Off:
255.255.255.0)
Gateway (DHCP/On: obtain
automatically, DHCP/Off: 0.0.0.0)
DNS Auto (On/Off)
Primary DNS Server (DNS Auto/
On: obtain automatically, DNS
Auto/Off: 0.0.0.0)
Secondary DNS Server (DNS
Auto/On: obtain automatically,
DNS Auto/Off: 0.0.0.0)
Maintenance >Network Client Mode
Makes settings related to network client mode.
[Note]
Network client mode cannot be set if values are not entered for all items.
Item Setting
Setting On/Off
Description
Enables/disables DHCP.
When set to On, an IP address is automatically
assigned to the camcorder.
To enter the camcorder IP address manually, set
to Off.
obtain Enter the IP address of the camcorder.
Enabled only when DHCP is Off.
obtain Enter the subnet mask of the camcorder.
Enabled only when DHCP is Off.
Enter the gateway for the access point.
Enabled only when DHCP is Off.
Enables/disables automatic DNS.
When set to On, the address of the DNS server is
obtained automatically.
Enter the primary DNS server for the router.
Enabled only when DNS Auto is Off.
Enter the secondary DNS server for the router.
Enabled only when DNS Auto is Off.
Description
Turns network client mode on/off.
[Note]
When set to On, the firmware version cannot be
updated.