Sony PXW-Z450 Operating Instructions Manual page 103

000 103
7. Menu Display and Settings: Menu List
Maintenance >Audio
Makes settings related to audio.
Item Setting
CH2 Wind Filter On/Off
CH2 Wind Filter On/Off
CH4 Wind Filter On/Off
1kHz Tone on Color On/Off/Auto
Bars
MIC CH1 Level Side1/Front/Front+Side1
MIC CH2 Level Side2/Front/Front+Side2
Side1/Front/Front+Side1
Rear1/WRR Level
Rear2/WRR Level Side2/Front/Front+Side2
Description
Turns the channel 2 wind noise reduction filter
on/off.
Turns the channel 3 wind noise reduction filter
on/off.
Turns the channel 4 wind noise reduction filter
on/off.
Sets whether to output (On) or not output (Off) a
1 kHz test signal in color bar mode.
Auto: Outputs a test signal only when the AUDIO
SELECT CH1 switch is set to AUTO.
Selects the knob for adjusting the audio level
when recording input audio from the front
microphone on channel 1.
Side1: LEVEL knob (left) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side1: LEVEL knob (left) and MIC LEVEL
knob (linked control)
Selects the knob for adjusting the audio level
when recording input audio from the front
microphone on channel 2.
Side2: LEVEL knob (right) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side2: LEVEL knob (right) and MIC LEVEL
knob (linked control)
Selects the knob for adjusting the audio level of a
wireless microphone or a device connected to the
AUDIO IN CH-1 connector on the rear panel.
Side1: LEVEL knob (left) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side1: LEVEL knob (left) and MIC LEVEL
knob (linked control)
Selects the knob for adjusting the audio level of a
wireless microphone or a device connected to the
AUDIO IN CH-2 connector on the rear panel.
Side2: LEVEL knob (right) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side2: LEVEL knob (right) and MIC LEVEL
knob (linked control)
Maintenance >Audio
Makes settings related to audio.
Item Setting
Audio CH3 Level Side3/Front/Front+Side3
Side4/Front/Front+Side4
Audio CH4 Level
Maintenance >WRR Setting
Makes settings related to the wireless tuner.
Item Setting
WRR Valid CH Sel All/CH1
WRR CH Select TX1/TX2
WRR Delay Comp On/Off
TX ---
TX Audio Peak ---/Peak
---/Mic/Line
TX Input Level
TX ATT Level ---
Description
Selects the knob for adjusting the audio level
recorded on channel 3.
Side3: LEVEL knob on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side3: LEVEL knob and MIC LEVEL knob
(linked control)
Selects the knob for adjusting the audio level
recorded on channel 4.
Side4: LEVEL knob on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side4: LEVEL knob and MIC LEVEL knob
(linked control)
Description
Selects whether to enable channels 1 and 2 of the
wireless tuner (All) or channel 1 only (CH1).
Selects the reception channel for display in the
menu.
TX1: Displays channel 1.
TX2: Displays channel 2.
Selects whether to enable (On) or disable (Off) the
delay compensation function for wireless input
audio. (When On is selected, all E-E output audio
is delayed by about 8 ms.)
Displays the name of the transmitter whose
signals are being received on the channel
selected by WRR CH Select.
Displays whether the AF level of the transmitter
whose signals are being received on the channel
selected by WRR CH Select are over peak.
Displays whether the input level of the transmitter
whose signals are being received on the channel
selected by WRR CH Select is set to microphone
(Mic) or line (Line).
Sets the ATT level of the transmitter whose signals
are being received on the channel selected by
WRR CH Select. (The setting range varies
depending on the transmitter.)