Sony PXW-Z450 Operating Instructions Manual page 123

123 000
9. Connecting External Devices: Connecting a Remote Control Unit
data stored in the main data block even if a
remote control unit is connected. In this case,
the settings stored in the main data block will
be updated when you change the settings on
the remote control unit. Thus, the settings of the
paint data made with the remote control unit will
be retained even after the remote control unit is
removed. However, if the switch position on the
remote control unit differs from the one on the
camcorder, the switch position on the camcorder
takes precedence.
Also, it is possible to keep the settings that are in
effect before you connect the remote control unit.
In this case, you must set the control knobs to
relative value mode on the remote control unit.
For details, refer to the operation manual supplied with the
remote control unit.
Operating the Menu from the
RM-B170
1
Set the DISPLAY switch to the MENU position.
The menu is displayed on the monitor
connected to the MONITOR connector of the
RM-B170.
2
Select and set menu items using the MENU
SELECT knob and CANCEL/ENTER switch.
3
When finished, set the DISPLAY switch to the
ON or OFF position to exit the menu.
For details about RMB170 operation, refer to the operation
manual of the RM-B170.