Sony PXW-Z450 Operating Instructions Manual page 108

108 000
7. Menu Display and Settings: Menu List
Maintenance >Network Client Mode
Makes settings related to network client mode.
[Note]
Network client mode cannot be set if values are not entered for all items.
Item Setting
Detail Settings CCM Address
CCM Port (1 to 65535 (8443))
User Name
Password
NCM with Proxy (Enable/Disable) Enable: Enable proxy recording when connected
Maintenance >File Transfer
Makes settings related to network transfer of data on SxS memory cards in the camcorder.
Item Setting
File Transfer Execute/Cancel
Remote File Transfer Enable/Disable
Auto Upload (Proxy) Off/On
Maintenance >Streaming
Makes settings related to streaming.
Item Setting
Setting On/Off
Description
Sets the address of the CCM to connect.
Host name or IP address
Sets the port number of the CCM to connect
Sets the user name for authentication of the CCM
to connect.
Sets the password of the CCM to connect.
with a CCM.
Disable: Disable proxy recording when connected
with a CCM.
Description
Switches to transfer mode (execute by selecting
Execute).
Sets whether to enable/disable switching to
transfer mode to transfer original files recorded on
the camcorder by remote operation over a
network.
Enable: Enable switching to transfer mode by
remote operation over a network.
It is not necessary to execute a transfer using
Maintenance >File Transfer.
Disable: Disable switching to transfer mode by
remote operation over a network.
It is necessary to execute a transfer using
Maintenance >File Transfer.
Turns proxy file auto transfer on/off.
Description
Turns streaming transmission on/off.
[Notes]
ˎ This setting is set to Off when you turn the power on
ˎ
again.
ˎ When set to On, the monitoring function is not ˎ
available.
Maintenance >Streaming
Makes settings related to streaming.
Item Setting
Preset Select Preset 1/Preset 2/Preset 3
Size HD Auto/
1280×720/
640×360/
480×270/
320×180
Bit Rate 9Mbps/
6Mbps/
3Mbps/
2Mbps/
1Mbps/
0.5Mbps/
0.3Mbps(Mono L)/
0.3Mbps(Mono R)/
0.2Mbps(Mono L)/
0.2Mbps(Mono R)
MPEG-2 TS/UDP/MPEG-2 TS/
Type
RTP
Destination Address Character string (0.0.0.0)
Destination Port 1 to 65545 (1234)
Audio Channel CH1/CH2/CH3/CH4
Maintenance >Clock Set
Sets the internal clock.
Item Setting
Date Mode YYMMDD/MMDDYY/DDMMYY
12H/24H 12H/24H
Date
Description
Selects a streaming preset.
The settings are common to Preset 1/Preset 2/
Preset 3. See below for descriptions for the
settings in a preset.
Sets the size of video for streaming.
When "HD Auto" is selected, the size is set to
1920×1080 or 1280×720, according to the setting
of the recording format recorded on the SxS
memory card or the format of the clip to be
played back.
Sets the bit rate of video for streaming.
The selectable bit rate varies depending on the
Size setting.
[Notes]
ˎ Audio/video data is transmitted as-is via the Internet. ˎ
Accordingly, the data may potentially be exposed
to other parties. Always check that the transmission
destination can receive the streaming data.
ˎ The data may be sent to an unintended party if the ˎ
address or other settings are configured incorrectly.
ˎ Not all frames may be played, depending on the ˎ
status of the network.
ˎ The picture quality may deteriorate in scenes with
ˎ
excessive motion.
ˎ Not all frames may be played when the stream is set ˎ
to a large size with a small bit rate. To reduce this,
select a smaller size for the Size setting.
Selects the type of video for streaming.
Enter the address of the transmission destination
server for streaming data.
Enter the port number of the transmission
destination server used for streaming.
Selects the audio channel for the streaming
output.
Description
Selects the display format for dates.
Selects the clock display format.
Displays the date setting screen.