Table of Contents
Advertisement
102
000
7. Menu Display and Settings: Menu List
Maintenance >Battery
Makes settings related to batteries.
Item
Setting
Near End: Info Battery
5%/10%/15%...95%/100%
End: Info Battery
0%/1%/2%/3%/4%/5%
Near End: Sony Battery
11.5V
to 17V
(0.1V steps)
11.0V
End: Sony Battery
to 11.5V
(0.1V steps)
Near End: Other Battery 11.5V to
11.8V
(0.1V steps)
End: Other Battery
11.0V
to 14.0V
(0.1V steps)
Detected Battery
Sony Info Battery/Sony Battery/
Other Battery/DC IN
Maintenance >DC Voltage Alarm
Sets alarms relating to external DC supply voltage.
Item
Setting
DC Low Voltage1
11.5V
to 17V
(0.1V steps)
DC Low Voltage2
11.0V
to 14.0V
(0.1V steps)
Maintenance >Audio
Makes settings related to audio.
Item
Setting
Front MIC Select
Mono/Stereo
Rear XLR Auto
On/Off
Front MIC CH1 Ref
–70dB/–60dB/–50dB/–40dB/
–30dB
Description
Sets the threshold value for displaying the "Battery
Near End" warning when using a BP-FLX75/
GL65A/GL95A battery pack.
Sets the threshold value for displaying the "Battery
End" warning when using a BP-FLX75/GL65A/
GL95A battery pack.
Sets the threshold value for displaying the "Battery
Near End" warning when using a BP-L60S/L80S
battery pack.
Sets the threshold value for displaying the "Battery
End" warning when using a BP-L60S/L80S battery
pack.
to 17.0V
Sets the threshold value for displaying the "Battery
Near End" warning when using a non-Sony
battery pack.
Sets the threshold value for displaying the "Battery
End" warning when using a non-Sony battery
pack.
Displays the result of automatic battery pack type
detection.
Description
Sets the threshold value for displaying the "Battery
Near End" warning when using an external power
source connected to the DC IN connector.
Sets the threshold value for displaying the "Battery
End" warning when using an external power
source connected to the DC IN connector.
Description
Selects whether the front microphone is
monaural (Mono) or stereo (Stereo).
Turns the automatic detection function on/off for
detecting cable connections on the AUDIO IN
CH-1/CH-2 connectors on the rear panel.
Selects the reference level of the front
microphone for channel 1.
Maintenance >Audio
Makes settings related to audio.
Item
Setting
Front MIC CH2 Ref
–70dB/–60dB/–50dB/–40dB/
–30dB
Rear MIC CH1 Ref
–70dB/–60dB/–50dB/–40dB/
–30dB
Rear MIC CH2 Ref
–70dB/–60dB/–50dB/–40dB/
–30dB
Line Input Ref
+4dB/0dB/–3dB/EBUL
Min Alarm Volume
Off/Set
Speaker Attenuate
Off/3dB/6dB/9dB/12dB
Headphone Out
Mono/Stereo
Reference Level
–20dB/–18dB/–16dB/–12dB/
EBUL
Reference Out
+4dB/0dB/–3dB/EBUL
CH1&2 AGC Mode
Mono/Stereo
CH3&4 AGC Mode
Mono/Stereo
AGC Spec
–6dB/–9dB/–12dB/–15dB/–17dB Selects the AGC characteristic (saturation level).
Off/–6dB/–9dB/–12dB/–15dB/
Limiter Mode
–17dB
Output Limiter
On/Off
CH1 Wind Filter
On/Off
Description
Selects the reference level of the front
microphone for channel 2.
Selects the reference input level when the AUDIO
IN CH1 switch is set to MIC.
Selects the reference input level when the AUDIO
IN CH2 switch is set to MIC.
Selects the reference input level when the AUDIO
IN CH1 and AUDIO IN CH2 switches are set to
LINE.
Selects the volume when the ALARM knob is
turned all the way down.
Off: Inaudible
Set: Audible
Selects the volume from the monitor speakers
(does not affect earphone volume).
Selects whether the earphones are monaural
(Mono) or stereo (Stereo).
Sets the output level of the 1 kHz test signal.
Sets the output level relative to the reference
input level.
Automatically adjusts the input level of analog
audio signals recorded on channels 1 and 2, and
selects whether to make the adjustments
separately for each channel (Mono) or in stereo
mode (Stereo).
Automatically adjusts the input level of analog
audio signals recorded on channels 3 and 4, and
selects whether to make the adjustments
separately for each channel (Mono) or in stereo
mode (Stereo).
Selects the limiter characteristic (saturation level)
for large input signals when adjusting the audio
input level manually. Select Off if not using the
limiter.
Turns the audio output limiter on/off.
Turns the channel 1 wind noise reduction filter
on/off.
Hide quick links:
Advertisement
Table of Contents
